For assistance with the online store please contact:

webshop.us@ichaus.com
phone: (603)-831-3295


  Home > IO Circuits >

iC-DX EVAL DX1M
iC-DX EVAL DX1M
 
Price: $14.50 each
RoHS Status: Yes

Quantity in Stock:10

Product Code: IC-DX EVAL DX1M
Qty:

Description Features
 
The iC-DX is a monolithic switch capable of driving ohmic, inductive and capacitive loads and features integrated
reverse polarity protection. The supply voltage VB of the device can range from 8 to 30V.
 
Output source/sink-current is at least 150 mA, with saturation voltages of typically 2 V. With input OE on high level state, the output works as a push-pull stage under control of pin IN. If pin IN is set either to high or low level, the output acts as a high-side (PNP) or low-side (NPN) driver which is activated by a high logic level on input OE.
 
Output transitions are slew-rate limited to minimize interference on lines. The output is current limited to 450mA maximum and short circuit protected by shutting down the device with excessive temperature.
A regulated 5 V supply which can be loaded up to 10mA is available at pin VOUT.


Browse for more products in the same category as this item:

IO Circuits