For assistance with the online store please contact:
phone: (603)-831-3295

  Home > IO Circuits >

iC-DX3 DFN6-2x2 Sample
iC-DX3 DFN6-2x2 Sample
Please enter the # of Sample Boxes in the Qty field.
Price per Sample Box: $21.75 (Sample Box/5 Pcs.) ($4.35 each)
RoHS Status: Yes

Quantity in Stock:3

Product Code: IC-DX3-DFN6-2X2-SAMPLE

Description Features
The iC-DX is a monolithic switch capable of driving ohmic, inductive and capacitive loads and features integrated
reverse polarity protection. The supply voltage VB of the device can range from 8 to 30V. Output source/sink-current is at least 150 mA, with saturation voltages of typically 2 V.
With input OE on high level state, the output works as a push-pull stage under control of pin IN. If pin IN is set either to high or low level, the output acts as a high-side (PNP) or low-side (NPN) driver which is activated by a high logic level on input OE.
Output transitions are slew-rate limited to minimize interference on lines. The output is current limited to 450mA maximum and short circuit protected by shutting down the device with excessive temperature.
A regulated 3.3V supply which can be loaded up to 10mA is available at pin VOUT.

Browse for more products in the same category as this item:

IO Circuits